I told you about Mrs. K’s Spiky 16 Patch blocks some time ago. Not long after, she sent me a photo of the quilt she finished.
I love it! I wouldn’t have chosen that gold, but it is fabulous. did you notice the triangles forming a circle around the center – or suggesting the center? I love that!
Also the corners are highlighted, which is fantastic as well. Great job all around.
I need to get back to my units. I have a bunch of 16 patch blocks and HRTs made and haven’t made anymore of the spiky blocks.
I have been looking at my three Spiky 16 patch blocks and trying to decide if I can get away with a quilt made from 3 blocks. As I mentioned, I need to make some HRTs and I haven’t had a chance to finish them up.
Spiky 16 Patch – offset test n.1
I had an idea to make sort of a square with the on point blocks offset. the effect wasn’t quite what I was expecting.
Spiky 16 Patch – offset test n.2
I tried to offset the blocks again leaving space for a fourth block. It still didn’t work the way I expected. It isn’t what I want.
A lot of what I am doing at the moment is prep. Cutting fabric that I can’t sew together now, but will do so later. Pressing fabric that will be cut whose small pieces will eventually be sewn back into a large piece of something. This is the sad nature of Hunting & Gathering.
As I mentioned the other day, I have been cutting clues for more Spiky 16 patch blocks. I have quite a number of 16 patches waiting to be spiked, so there is a never ending need. For some reason that I can’t remember right now, I couldn’t actually get fabric under the machine, but I could cut and I cut a lot.
I have to say and I am really liking the Split Recs ruler by Studio 180 Designs. I can cut gazillions of these pieces without thinking twice. Watch the video!
I finally got into a rhythm with the Bias rectangles (HRTs- half rectangle triangles) and was really able to make a lot of them, get them trimmed and put blocks together. The sticking point is always hauling fabric out of the fabric closet. If I didn’t want to make these pieces scrappy, it wouldn’t be a problem, but I do like the scrappy look.
My original idea was to make a large quilt with 16 blocks. When I realized that each block was 52 pieces, I decided that I would start with a 4 block quilt and go from there. It isn’t difficult to make the HRTs once I got the hang of it and the blocks really don’t feel like they have 52 pieces. Still, I wanted to finish and the top I made finishes at 39″ x 39″. That is big enough for the NICU. I still have the other 16 patches and will continue to make bias rectangles until I have made 4 quilts like this one. I should be an expert by then!
HRT donation quilt back
The back was also scrappy, of course. I used up some fabric that has been hanging around.
I made the blue and green donation blocks last year with the idea that I would add HRTs to the blocks to make something a little different.
I have been struggling along with the HRTs,despite all the different tutorials and information I found. I was about to put it away and try “later” when I got a new burst of energy for the project. I worked on it much of the day Saturday. The burst of energy came from watching the video on how to use the Split Recs ruler. DUH, I know. I did read the directions, but clearly didn’t understand them, because I was struggling mightily to use the ruler. I really needed to watch* the video, because there are certain steps and tips that come across a lot better via video. The biggest tip: both fabrics need to face the same way. This means wrong side to right side NOT right sides together. HUGE tip. HUGE.
HRT Donation Quilt – March 31, 2018
The picture (above left) is from my first struggles with the ruler and different ways of making the HRTs.
The image (right) is from today, after I trimmed the HRTs I had and started making new HRTs to fill in the gaps.
The quilt will be 4 blocks – it will be a small NICU quilt. I have 16 blocks and may make more of these spiky blocks. We will have to see. I am pleased I am finally making progress.
*I don’t know why I am so resistant to watching quilting videos. I suppose I perceive that it takes my time away from the actual sewing. I found the Split Recs video to be invaluable and am sorry I didn’t watch it sooner.
Last week, I wrote a post on HRTs. After writing it and concentrating, mostly, on tutorials, I thought of rulers. Yes, I mentioned the Tri-Recs ruler, but I thought there might be others. I am not sure why I didn’t think of it myself.
BlocLoc HRT ruler
This idea got legs when one reader (Thanks, Libby!) told me that the BlocLoc ruler system has an HRT ruler. I saw them in an online shop and they look similar to the BiRangle, though different as well.
I am not familiar with this system of rulers, not because there is anything wrong with them. I haven’t used them, mostly because I don’t want to get sucked in to another type of ruler! I do want to support small quiltmaking businesses and I feel the urge to just try them all the time. It is hard since I am such a ruler lover.
Creative Grids HRT
After finding the BlocLoc rulers I went searching for others. I found a Creative Grids triangle ruler** that will help you make HRTs in a variety of different sizes. It is similar in shape to the Tri Recs, but looks like you can make more sizes using it.
I think you could also make blocks with super skinny triangles like Storm at Sea or 54-40 or Fight.
This CG ruler is a little pricey – $18.95. Think of how many quilts you could make! 😉
Accuquilt-HRT die
It also occurred to me that Accuquilt may have a die. They do. The die (#55411) cuts two skinny triangles in a 3 x 6 inch** size. You must have a Go! machine to use this die. It is compatible with the Studio, Big and Go! Baby, though you might have to use an adapter. This die is also included in the Accuquilt GO! Qube Mix & Match 12″ Block set**. The obvious drawback is that you get only one size.
I went to the Cotton Patch a few weeks ago and they had a whole Accuquilt Center in their store now! It made me want to swoon. If I only had unlimited funds and space! I suppose more time would be useful as well. 😉
Deb Tucker tutorial on using the Split Rects ruler
Happy HRT making!
**I use affiliate links and may be paid for your purchase of an item when you click on an item link in my post. There is no additional cost to you for clicking or purchasing items I recommend. I appreciate your clicks and purchases as it helps support this blog.
I have an idea to spice up the latest batch of 16 patch blocks I made for the BAMQG charity project using HRTs.
HRTs are half rectangle triangles, which are similar to half square triangles. This shape/block is also called a Bias Rectangle. I wanted to make them using a method similar to the Triangle Technique. Wouldn’t that be great? DH and SIL worked on the math, but they could only get one rectangle and a kite shape out of a similar method.
It might be easier to cut these shapes if you had a cutting mat turntable. Martelli has one that includes an ironing surface.
The Modern Quilt Guild posted a tutorial on bias rectangles. The tutorial shows how to make 4.5 x 6.5 inch final block size, but notes that the tutorial works for any size as long as you use the same sized rectangles. The tutorial includes directions for “squaring” up the blocks (a rectangle made up of two triangles).
Wayne Kollinger also posted 3 (yes, THREE) different tutorials for making HRTs. First, he talks about just cutting fabric. No tools or special rulers. Wayne’s second method also uses the Tri Recs ruler. The third tutorial uses freezer paper. One thing Wayne says is “the rectangles are twice as long as they are wide. This means that for a 6″x6″ block the rectangles would have a finished size of 2″x 4″. For a 9″x9″ block the rectangles would have a finished size of 3″x6″.”, which is very helpful information moving forward.
Heidi at Buttons and Butterflies posted a tutorial includes what not to do, which is a great illustration of what I found out from DH’s mathematical adventures. From the tutorial you can see what happens without having to do it yourself. 😉 There are a few different techniques included in this post including an Accuquilt technique. The Accuquilt die has the tips cut off for easier matching of patches. She finishes up with a tutorial similar to the Modern Quilt Guild tutorial. Heidi also talks about the differences in HRTs, which I was glad about since I didn’t realize some of the things she discusses.
Kristi of the Schnitzel and Boo Blog uses a similar technique to Heidi, but sews on each side of the center line to make her HRTs in her post. The post includes a quilt tutorial/pattern as well.
Marjorie Rhine from Quilt Woman has a PDF discussthe topic, including three options for making the blocks. One is to use a template, similar to my tutorial on using templates. I supposed the Tri Recs ruler discussed above would also work. Also mentioned are the Marti Michell’s Template Set D or Margaret Miller’s AnglePlay Template. The latter is a companion to a couple of books. She includes paper piecing and using templates as techniques. The PDF includes a lot of useful information.
These can also be made using foundation piecing. Printing a template from EQ7 or drawing the paper template is also possible.
BiRangle ruler
Finally, I have a ruler called a BiRangle ruler. It is by Martingale (I bought it when the company was called That Patchwork Place).
Sew Mama Sew has a tablerunner pattern. She talks about why the Triangle Technique does not work for HRTs.