More on the Machines

Janome DC5100
Janome DC5100

I decided that being at Grand Parlor was a good time to send my sewing machine to the spa. I wouldn’t have a chance to even think about sewing, which means that it wouldn’t make me crazy to have it gone.

I am not sure it has been serviced since I bought it and I definitely did not buy it with every day use in mind. As you might recall, it was a replacement for the Janome Jem, which I took to classes. Then, I began having irredeemable problems with the Janome 9k and switched to this machine (Janome DC5100) on what I thought was a temporary basis. Here it is a year + later and I am still using it. It was definitely time for a service. I might have had it serviced before, but I don’t think so. Off it went.

No major problems, but when I was on the phone with Angi at the Sewing Machine Place store in Millbrae, she said that she remembered me. I told her about my 9k and she was horrified that she didn’t remember and more horrified that she couldn’t fix it. I didn’t really remember the details, but she asked me to bring it in and see what was up. They don’t charge to look, so I decided I would.

Janome 9000 (9k)
Janome 9000 (9k)

First, I checked the machine myself. It has been sitting since I had problems with it in 2014. Fortunately the cover was on (what do you think I am? A sewing machine torturer?? πŸ˜‰Β Β  ), so there wasn’t much dust. Immediately the problems started. It ran on its own when I tried to thread it using the needle down button. I couldn’t stop it without turning it off. I didn’t do any further testing. I am not be a sewing machine torturer, but I am also not a sewing machine repair person and it has been a long time since I used the 9k. It simply wasn’t familiar to me anymore. πŸ™

I finally had some spare time last Wednesday and took it in. I couldn’t find a parking place nearby and had to carry it over a block to get it to the store. I work out, but that baby is heavy.

Angi was selling a machine so her colleague helped me. We went through all the details of the issues I had found and she found that the machine wasn’t feeding either except when it ran by itself. Angi came over when she was done and we had the whole conversation over. She insisted that she would have remembered these problems, but I think I didn’t bring it back, because I thought it was irreparable and I had already been to 3 repair shops. I felt bad because I hadn’t looked up the exact details of what happened last before I went there. I know I took it to three shops including hers, but looked it up by tag later and got some clarity.

Angi looked at the machine and thought that wires had been crossed somewhere along the way, though the problem may stem from something called the step motor. No electronics, which is good since they are hard to come by, if not impossible for a Janome 9k. She thought 2 weeks and ~$300.

Janome 9400
Janome 9400

I really want a new machine and have my eye on the Janome 9400. However, if I get a new machine with a larger throat, I have to get a new table as well and that adds to the cost. There is really no point in hauling out heavy furniture and bringing new heavy furniture in without painting and generally giving my workroom a facelift. New machine, much less a new table and decor are just not in the cards right now. YM is in college, I am building my business. The finances just don’t work. The other thing is that I fall in love with new Janome machines all the time. Since I have been thinking about new machines, there have been at least 2 others I have wanted. If Angi and her team can get the 9k running again, that will keep me for awhile longer. Cross your fingers.

The Sewing Machine Place
239 Broadway
Millbrae, CA 94030
(650) 697-4739
10:00am-5:00pm (call as hours may vary)

Author: Jaye

Quiltmaker who enjoys writing and frozen chocolate covered bananas.

6 thoughts on “More on the Machines”

    1. I’d like a new machine, but this is not the right time and as I have said, I would have to get a new table as well. Too much so it will be great if they can fix the 9k.

Leave a Reply

Your email address will not be published. Required fields are marked *