I originally planned to publish this post on September 19. Somehow, the time got away from me. While I did finish the Running with Scissors tote, this post has mostly to do with working with vinyl. I thought it might still be of interest.
One thing that happened while I was working on my project was I had to develop some tips/tricks of my own.
The pattern, in general, is really good. It says, however, in the vinyl pocket part of the pattern to mark the vinyl to make smaller pockets. It didn’t say how to mark the vinyl. I didn’t have access to the video at the time, which may have some tips. I didn’t want to use a Micron pen, though I know that the ink can be washed off of vinyl pretty easily. I also don’t have one of those wash away pens, so I decided tape would work. I used tape to mark the lines I needed to sew along.
I sewed right next to the tape. I didn’t want to go through it, because that would create a mess. This was tricky, because I also needed to sew with the vinyl covered by tissue. As I have talked about many times, you need to take care when working with vinyl. I didn’t have my teflon foot with me (duh, oversight), so I used the wrapper from the vinyl. You don’t need much, but you do need longish strips. The only issue was that there was a little residue left on the vinyl from the tape. I’ll clean it off later.
The zippers from ByAnnie are gorgeous. You can imagine that I was a little annoyed when I had to sew over the zipper ends.
I had to open the zipper – move the slide to the center, so it wouldn’t end up on the wrong side of the sewing line. That left the end of the zipper tape flooping around. I wanted the zipper teeth that would remain in the bag (not cut off) to be as close together as possible. I held it together with some tape.
This project has a lot of steps, but it does go together very well.
