2-in-1 Case #2 in Process

2-in-1 Case #2- closed - in process
2-in-1 Case #2- closed – in process

I started another 2-in-1 Case almost immediately after finishing the first one. As mentioned, this is an easy bag and I wanted to get it right. This one looks a lot better and is more functional.

I was pleased with the fuchsia binding. I thought it was a less distracting choice than the black and white, though I do like a good black and white stripe.

I made certain to the get the closure in the right place. I used a slight different process to sew it on. I put the female half of the snap in then, before sewing the tab to the back, I snapped it together. This helped me align the tab with the female part of the snap on the front. Then I pinned the tab to the back and sewed it down. Somehow the measurements in the pattern didn’t work for me.

2-in-1 Case #2- open - in process
2-in-1 Case #2- open – in process

I used the same fabric for the inside as I did in #1. It’s a nice bright white. I am pretty sure I bought it with Amanda when we were out shopping in Portland one time.

I used longer zippers as well- 9 inch instead of 8inch, as the pattern suggests.  I had to be careful not to hit the metal parts, but the zipper was fully enclosed in the tabs and the binding, which looks better. I will probably use a longer zipper next time and cut off the excess. It seems like a waste, but then I won’t have to worry about that metal zipper end. Hitting with a needle is no picnic.

Almost done then I send it off to be wrapped for the guild door prize.

Author: JayeL

Quiltmaker who enjoys writing and frozen chocolate covered bananas.