I had to clear the Retreat Organizer off the design wall, which encouraged me to start working on it. I made small amounts of progress after work each night last week. I feel well into now and was sad not to be able to work on it yesterday.
First, I was on the hardware step, so I added buckles and made straps. In the photo above (left) I have the female side of the buckles attached to the exterior. On the right you can see the male side of the buckles with the straps attached, but not attached to the exterior of the bag.
In this pattern, the straps are appliqued to the exterior not appliqued and sewn into a seam.
I also worked a little on the interior. This is one large pocket that has been divided into three.
This was originally supposed to be a fabric pocket. For me, out of sight is out of mind, so I made the pocket(s) out of vinyl. I put some fold over elastic** over the edge to avoid looking a raw edge.
On the picture you can see some tape and tissue paper, both of which I used to sew the dividing lines on the vinyl. These are pockets you could customize. I almost left one big pocket, but decided even a vinyl pocket might become a black hole of doom.
This project is off the design wall, which is great, but it is now spending most of its time on my ironing board. I really need a larger work table.
You can find this pattern with all of the videos on the Crafty Gemini website as the Retreat-in-a-Bag project.
**N. B. : Obviously, you should shop at local quilt shops and small businesses. However, if you are too busy or can’t find what you need there, I use Amazon affiliate links and may be paid for your purchase of an item when you click on an item’s link in my post. There is no additional cost to you for clicking or purchasing items I recommend. I appreciate your clicks and purchases as it helps support this blog.
